Underwater Magic Adhesive & Sealant, 290ml Tube

Made for direct underwater use, in fresh, sea (salt) and chlorine water as underwater adhesive, underwater grouting or underwater sealant.

Excellent adhesion on most surfaces without a primer. However, it is left to the consumer himself to check the product's suitability for the application in question.

Standard colors white, blue, sand, grey and black.

• Solvent Free

• 100% Silicone Free

• Free of Isocyanate

• Suitable for direct underwater use

• Excellent adhesion to most dry, damp, or wet surfaces

• Works best directly underwater!

Preparation is essential, all surfaces need to be solid, clean, free of grease, silicone, algae, residuals of sun cream, old adhesive and anything which could interfere with the bonding, your water need to be in balance (Chlorine / Bromine level in safe swimming pool levels, Ph, Calcium etc) and the water temperature during application needs to be between +5°C and maximum 40°C( 41°F and max 104°F), a shock treatment shall be avoided during curing 5 to 7 days after application.

You should keep your water in balance at all times since unbalanced water can not only be harmful to humans it also can destroy your armatures.

Q: Does it really work under water?
A: Yes Underwater Magic™ is specially designed to work under water and in wet areas.

Q: Why is the glue just sticking to the tile and not to the concrete in the pool?
A: You need to clean the concrete properly, we recommend a Scotch-Brite™ sponge to remove algae and loose concrete otherwise you glue the tile to the algae or to the loose concrete.

Q: Can i use Underwater Magic™ in a swimming pool containing Hydrogen Peroxide instead of chlorine?
A: Underwater Magic™ is tested without problems up to 30% Hydrogen Peroxide.

Q: Compared to a standard silicone tube Underwater Magic™ sounds expensive.
A: Underwater Magic™ is not a silicone it is a high performance adhesive & sealant designed for professional use, it does not attract ants or cockroaches, is non-poisonous and can be applied direct under water. Compare the price of emptying your pool, add the price of refilling it + chemicals + the time you can't use the pool!

Q: What do i need to do when i repair my swimming pool?
A: Preparation is essential when applying adhesives, all surfaces need to be solid, clean, free of grease, silicone, algae, residuals of sun cream, old adhesive and anything which could interfere with the bonding, your water need to be in balance (Chlorine / Bromine level in safe swimming pool levels, Ph, Calcium etc) and the water temperature during application needs to be between +5°C  and maximum 40°C( 41°F and max 104°F), a shock treatment shall be avoided during curing 5 to 7 days after application

You should keep your water in balance at all times since unbalanced water can not only be harmful to humans it also can destroy your armatures. 

Preparation is essential when applying adhesives, all surfaces need to be solid, clean, free of grease, silicone, algae, residuals of sun cream, old adhesive and anything which could interfere with the bonding, your water need to be in balance (Chlorine / Bromine level in safe swimming pool levels, Ph, Calcium etc) and the water temperature during application needs to be between +5°C  and maximum 40°C( 41°F and max 104°F), a shock treatment shall be avoided during curing 5 to 7 days after application

You should keep your water in balance at all times since unbalanced water can not only be harmful to humans it also can destroy your armatures.