CO2 (Programmable Pool System)

How to know when to replace the CO2 chamber in a pool system: The chamber gets cracked or begins leaking.   The check valve gets so corroded that it cannot be cleaned.  It is far easier to change the chamber than...

The CO2 chamber on the ECOsmarte Programmable Pool System needs to be cleaned about every other month during the pool season.  Otherwise the lack of cleaning will cause a premature failure of the valve in the chamber and require replacement of the...

Item needed to change the CO2 tank:  Channel Locks 1)  Turn off the valve to the empty tank. 2)  Unscrew the solenoid valve from the tank. 3)  Screw the solenoid onto the new tank. 4)  Open the valve on the new ...

Items needed to clean the Acid Magic (Muriatic Acid Replacement) A Bucket large enough to submerge the chamber Water 1)  Turn the pump and filter off and close the valves to prevent water loss when taking the electrode chamber out...

Item Needed To Determine Whether The CO2 Tank Is Empty: Bathroom Scale The weight of the CO2 tank when it is empty is marked on the outside of the tank. Weigh the tank and subtract the weight of the empty tank.  The difference is the...

How to replace the CO2 chamber on a pool system: 1)  Turn the pump off.    2)  Unscrew the chamber from the plumbing.   3)  Detach the CO2 hose by holding the brass end in with your fingers and...

When selecting a type of CO2 tank to use with the ECOsmarte Programmable Pool System, it is very important to make sure you do not get a siphon style tank.   The siphon tank draws from the bottom and will put liquid into the hoses which will...

There are a variety of local places to get CO2: Welding Supply Shops (Toll Welding, AirGas) Some Gas Stations Restaurants use CO2 for beverages.  Asking a local restaurant might help locate a CO2 supplier. Other possibilities are paintball...